• Home
  • News
  • Team
    • Professor
    • Current Members
    • Alumni
  • Research
    • Research Areas
    • Projects
    • Facilities
  • Publications
    • Journals
    • Conferences
    • Patents
    • Lectures
  • Join Us
  • Contact
ESC

Searching...

No results found

↑↓ Navigate ↵ Select
Powered by Hugo Blox
  • News
    • “韓 방산 드론 일괄 개발 탈피, 진화적 개발 체계 도입해야”
    • "값싼 드론이 전쟁 판도 바꿔... 韓,' 소버린 방산 드론' 전략 필요"
    • 이란전 게임체인저 드론, 항공기 아닌 탄약처럼 쓰인다
    • "본질은 이스라엘 변수" 트럼프 '지상군' 발언에 중동 확전 우려
    • "중국은 소총, 우린 활"...8년 뒤처진 K-드론 | SBS 뉴스
    • 로봇 '두뇌'는 미국, '몸'은 중국.. 한국의 반격 실마리는? | SBS 뉴스토리
    • 중국미래전략산업세미나, 드론 산업의 미래: 중국의 속도, 한국의 전략
    • 윤용진 카이스트 교수팀, 자가 치유 3D 프린팅 기술 국제 학술지 게재
    • 카이스트-구니스, 3D 프린팅 활용 '브릭코스터' 개발
    • 아름덴티스트리-카이스트, 3D 프린팅 연구 협력
    • 2023 GGGF 초격차 방위산업을 위한 AI 첨단 드론
    • 색깔로 이갈이 진단 스플린트 개발 화제
    • KAIST, 대전 방산 특화 개발연구소 구축…첨단 드론 연구 본격화
    • 카이스트, 방산 특화 첨단 드론 개발연구소 선정
    • 학생 창업기업 유니테크쓰리디피, 2022 X-IST 창업경진대회 대상(장관상) 수상
    • 주식회사 도우리-KAIST JDL, '디지털 음향 힐링센터' 개소
    • 윤용진 한국과학기술원 교수, 대학산업기술지원단 12대 단장 취임
    • "탄소제로가 곧 생존이 되는 시대" 이민환·윤용진·이원영의 『수소경제』
    • 수소경제, 2050 탄소배출제로, 수소가 답이다.
    • KAIST, 미세 유체 회전 운동 활용한 '현장 진단용 초고감도 바이오센서' 개발
    • 카이스트, 대학산업기술지원단과 인간중심 디자인씽킹 글로벌 창업교육에 앞장서
    • KAIST, 구글과 공동으로 AI 교육과정 개발한다
    • '디지털 네이티브를 위한 스마트러닝' 심포지엄 열어
    • 세종시-국토부, 자율주행 모빌리티 국제컨퍼런스 개최
    • 포스텍 등 대학 6곳 '반도체 지원사업' 선정
    • '실리콘'밸리?, 이제는 '싱가포르'밸리!
    • 에스피케어, '셀리온 DC온열매트' 기반 카이스트와 공동연구 협약 체결
    • 인천 항공융복합 신산업 육성 전략 세미나 개최
    • 자율주행차 달리는 '세종·제주의 미래' 미리 본다
    • 경기도公, 판교서 '경기 스마트시티 국제세미나'
    • 2017 판교자율주행모터쇼 산업전시포럼
    • 글로벌 기업가정신워크숍·창업경진대회
    • 충북대 LINC+사업단·창업지원단 '창업 특강'
    • KAIST, 대전 방산 특화 개발연구소 구축…첨단 드론 연구 본격화
  • Publications
    • Cellulose nanocrystals: Advancements and applications in 3D printing
    • Early deployment of deep learning models for lithium-ion battery state-of-health prediction with limited initial data
    • Enhancing mechanical performance of elastomeric vat-photopolymerized resins via functionalized cellulose nanocrystals
    • LLM-Inspired Vision Transformer Framework for Intelligent Quality Recognition in Aerosol Jet Printing
    • Near-critical bistable shock isolator designed with symmetry-breaking extension springs
    • Acoustofluidics Lab on a Chip System for size-based Nanoparticle Separation
    • Asymmetric bistable shock isolators for repeated force-transfer nullification using optimal payload return
    • Balancing Initial Stability and Stress Shielding in Screw Fixation of 3D-Implants for Osteosarcoma by Comparing Compressive and Locking Screws
    • Data-Augmented Online Updating of a Transformer–LSTM for Battery State Prediction
    • Effects of Factors on the Glass Transition Temperature in 4D Printing Using Design of Experiments
    • Exploring the Effect of Cadaver Head Fixation in Bone Conduction Hearing: Insights from Finite Element Modeling
    • Exploring the impact of force direction and phase on bone conduction hearing with bone conduction actuator
    • Hydration Reaction-Powered DNA Analysis Kit for Non-Instrumented Point-of-Care Diagnostics
    • Layer-wise Finite Element Modeling Approach in Fused Filament Fabrication for Vibration Control
    • Microstructure-Properties Relationships in Elastomeric Vat-Photopolymerized Resins Reinforced with Functionalized Cellulose Nanocrystals
    • Nonlinear shock isolation using the bottleneck phenomenon near a saddle–node ghost
    • Solid-State On-Chip Thermal Management Using Micro-Thermoelectric Devices
    • Sputtered SDC/Pt layered composite cathode with improved thermal stability for solid oxide fuel cells below 500° C
    • The HSV-Morphology Preprocessing Technique for Enhancing the Performance of Agricultural Object Detection Models
    • Torsional stiffness-softening effect of torque-dependent variation in moment arm length for torsional vibration isolation
    • Analytical investigation of bifurcations in bistable shock isolators
    • Anhysteretic high-static–low-dynamic stiffness vibration isolators with tunable inertial nonlinearity
    • Bistable shock isolator tuned to zero-frequency singularity for platform protection
    • Bistable Shock Isolators under Half-Sine Shock
    • Characterizing the Performance of a Resonance-Based MEMS Particle Sensor with Glass Beads
    • Competitive advantages of a bistable vibration isolator: Cut-off frequency and operational safety near harmful resonance
    • Conductive rGO/PEGDA Hydrogel for Controllable Drug Release
    • Digital light processing 3D printing of porous ceramics: A systematic analysis from a debinding perspective
    • Experimental Study on the Improving Properties of Cellulose Nano Crystal Reinforced Resin Based on Photopolymerization 3D Printing Method
    • Low-Intensity Continuous Ultrasound Enhances the Therapeutic Efficacy of Curcumin-Encapsulated Exosomes Derived from Hypoxic Liver Cancer Cells via Homotropic Drug Delivery Systems, Bioengineering
    • Prediction of curing depth dependence on CNT nanofiller dispersion for vat photopolymerization 3D printing
    • Processing Challenges and Delamination Prevention Methods in Titanium-Steel DED 3D printing
    • Real-time in-process control methods of process parameters for additive manufacturing
    • Real-time Predicting the Low-Temperature Performance of WLTC-based Lithium-Ion Battery Using an LSTM-PF Sequential Ensemble Model
    • Self‐Healing Materials for 3D Printing
    • Theoretical analysis of nonlinear critical phenomena in bistable shock isolators
    • A digital light processing 3D printing approach for tuning the interfacial properties of pore forming agents for porous ceramics
    • Digital light processing (DLP) based fabrication of porous ceramics by optimizing materials and process parameters
    • Effectiveness of Mental Health care by Using Machine Learning on Manufacturing Worker
    • Enhancing the reliability of particulate matter sensing by multivariate Tobit model using weather and air quality data
    • Fabrication of Porous Ceramic Parts via a Digital Light Processing-based 3D Printing Method
    • Near-Eye Holographic 3D Display and Advanced Amplitude-Modulating Encoding Scheme for Extended Reality
    • Nonlinear Dynamic Analysis of a Piezoelectric Energy Harvester with Mechanical Plucking Mechanism
    • Plasmonic metasurfaces of cellulose nanocrystal matrices with quadrants of aligned gold nanorods for photothermal anti-icing
    • Super aligned annular ring patterns of self-assembled nanomaterials
    • Applications, treatment, and reuse of plastic in electrical and electronic equipment
    • Avalanche Coalescence of Liquid Metal Particles for Uniform Flexible and Stretchable Electrodes
    • Average-Accumulated Normalized Dose (A-AND) Predicts Mechanical Properties of Photopolymer Printed by Vat Photopolymerization"
    • Continuously Varied Infill Pattern (ConVIP) for Fused Filament Fabrication 3D Printing
    • Continuously Varied Infill Pattern (ConVIP): Improvement of mechanical properties and printing speed of Fused Filament Fabrication (FFF) 3D printing"
    • Effect of angstrom-level oxide overcoat on Sr segregation behavior of LSM electrodes, International Journal of Hydrogen Energy, 47 (77)
    • Enhancing reliability of particulate matter sensing by machine learning using weather and air-quality data
    • Evaluation of Dispersion State of CNTs in Resin, and its Curing Characteristics Depending on the Dispersion State
    • Evaluation of eye response using a wearable display with automatic interpupillary distance adjustment, Optics Express, 30 (5)
    • Harmonic Balance Analysis of Magnetically Coupled Two-degree-of-freedom Bistable Energy Harvesters"
    • Hybrid material extrusion 3D printing to strengthen interlayer adhesion through hot rolling
    • In situ electrical and electrochemical characteristic measurement using AFM in high temperature
    • Influence of dispersant concentration toward enhancing printing precision and surface quality of vat photopolymerization 3D printed ceramics
    • Machine Learning-Assisted Optimization of TBBPA-bis-(2,3-dibromopropyl ether) Extraction Process from ABS Polymer, Chemosphere, 287
    • Optimal dispersant concentration of PZT ceramic-containing slurry to enhance printing and surface quality of DLP 3D printed ceramics
    • Structural and Electrical Properties of Atomic Layer Deposited PtRu Bimetallic Alloy Thin Films, Coatings, 12 (1)
    • Ultrasonic-assisted tetrabromobisphenol A-bis-(2, 3-dibromo-2-methylpropyl ether) extraction process from ABS polymer supported by machine learning
    • Ultrasonic-assisted tetrabromobisphenol A-Derived Brominated Flame Retardant Extraction Process from ABS Polymer Supported by Machine Learning
    • Continuously Varied Infill Pattern method for 3D printing
    • Method of PM2.5 sensor calibration by using visibility, weather and climate data
    • 4D printing materials for Vat Photopolymerization
    • A rotationally focused flow (RFF) microfluidic biosensor by density difference for early-stage detectable diagnosis
    • A study on the improvement of the adhesion rate of photocurable 3D ceramic resin
    • Ceramic 3D printing manufacturing technology
    • Development of a 3D Printing Teeth Splint including a Colorimetric Sensor, Korean Society of Precision Engineering Proceedings
    • Enhancing Interlayer Adhesion of Fused Deposition Modeling through Thermo- mechanical Methods
    • Fabrication of Plasmon-Active Polymer-Nanoparticle Composites for Biosensing Applications
    • FDM 3D Printed Shape Deformation Characteristics Analysis
    • Glass transition temperature prediction based on tBA-co-DEGDA composition and 4D printing process full-factorial DOE and machine learning
    • How the saline water intrusion has reshaped the agricultural landscape of the Vietnamese Mekong Delta, a review
    • Improvement of Mechanical Properties based on Continuously Varied Infill Pattern (ConVIP) Method in FDM Type 3D printing, International Symposium on Precision Engineering and Sustainable Manufacturing
    • Inkjet-printed Ag@ SDC core-shell nanoparticles as a high-performance cathode for low-temperature solid oxide fuel cells
    • Load Resistance Optimization of a Magnetically Coupled Two-Degree-of-Freedom Bistable Energy Harvester Considering Third-Harmonic Distortion in Forced Oscillation
    • On the road to hydrogen society: Enabling technologies toward Carbon Net-Zer
    • Optical and electrical properties of multilayer grid electrodes for highly durable transparent conductive electrodes
    • Optimization of 3D Printing Process Parameters for Mechanical Properties of DLP-Printed Photopolymer
    • Predicting 4D printing Factors based on Design of Experiment (DoE) and Machine Learning with Small Data
    • Printing of Woodpile Scaffold Using Fresnel Lens for Tissue Engineering
    • Studies on the dimensional and piezoelectric characteristics of 3D printed piezoelectric structures
    • The Study on the Composition of Materials for High-resolution 3D Ceramic Printing Technology
    • TiO2 Nanorods and Pt Nanoparticles under a UV-LED for an NO2 Gas Sensor at Room Temperature
    • Toward sustainable 3D printing technology: Ultra fast and low cost 3D hologram printing
    • Biosensor using multiphase flow and its operation method
    • Enhancement of label-free optical biosensor in rotationally focused flow-based microfluidic system
    • Fuel Cell
    • Energy conversation device and method of forming the same
    • Design Thinking and Digital Transformation
    • Estimation of Inertial Measurement Unit based 3D Localization
    • Impact of Fine Particulate Matter on Visibility at Incheon International Airport, South Korea
    • Inertial Measurement unit based ZUPT & Kalman filter algorithm for 3D position estimation
    • Prediction of 4D Printing shape memory polymer characterization using machine learning
    • Three-Dimensional Printing of Piezoelectric Materials for Direction Sensor
    • Three-Dimensional Printing of Piezoelectric Structure for strain sensor
    • Understanding Interdependencies between Mechanical Velocity and Electrical Voltage in Electromagnetic Micromixers
    • Enhanced broadband performance of magnetically coupled 2-DOF bistable energy harvester with secondary intrawell resonances
    • Frequency Response Analysis of a 2-DOF Bistable Energy Harvesting System, KSPE 2020, 21(8)
    • Specific heat measurements of CNT nanofluids
    • Energy conversation device and method of forming the same
    • 能量转换装置及形成其的方法
    • Energy conversion device and its manufacturing method
    • A disposable lab-on-a-chip platform for highly efficient RNA isolation
    • A novel control technique to reduce the effects of torsional interaction in wind turbine system
    • An acoustic micromixer using low-powered voice coil actuation
    • Direct Drive Propeller System Modelling and Active Protection
    • Effect of electrolyte thickness on electrochemical reactions and thermo- fluidic characteristics inside a SOFC unit cell
    • Energy conversion device and method of forming the same
    • Liu, X., Ganjanayake, C
    • Mechanical effects of cochlear implant on acoustic hearing
    • Mechanism of bone-conducted hearing: mathematical approach
    • Mitigation of resonance vibration effects in marine propulsion
    • Modelling and Control to Mitigate Dynamic Effects of Unbalanced Masses in Wind Turbine Systems
    • Numerical study on electrochemical performance of low-temperature micro- solid oxide fuel cells with submicron platinum electrodes
    • Study of concentric, eccentric and split type magnetic membrane micro-mixers
    • Study on PM10, PM2.5, and visibility impairment. 한국 기상학회 학술대회 논문집
    • Two-Wavelength, Photo-Initiation and Photo-Inhibition Competing for Selective Photo-Patterning of Hydrogel Porous Microstructures
    • UV-LEDs for the disinfection and bio-sensing applications
    • Won, W.-S., Oh, R., Lee, W., Kim, Yoon, Y.-J., 2018 Study on PM10, PM2.5, and visibility impairment, Proceedings of the Korean Meteorological Society
    • 3D printed polycaprolactone carbon nanotube composite scaffolds for cardiac tissue engineering
    • An optical MEMS accelerometer fabricated using double-sided deep reactive ion etching on silicon-on- insulator wafer
    • Dynamic analysis of diesel generator set under cylinder deactivation
    • Femtosecond-laser-based 3D printing for tissue engineering and cell biology applications
    • Mechanical model of an arched basilar membrane in the gerbil cochlea
    • Modeling and control of marine diesel generator system with active protection
    • Piezoelectric cylindrical design for harvesting energy in multi-directional vibration source
    • Reduction of control signal overhead for electric vehicle charging operation in smart grid system
    • Sensor placement analysis for torsional vibration suppression on marine electric propulsion
    • Sputtered nanoporous PtNi thin film cathodes with improved thermal stability for low temperature solid oxide fuel cells
    • Threshold-Based Random Charging Scheme for Decentralized PEV Charging Operation in a Smart Grid
    • Energy conversation device and method of forming the same
    • Dynamic study of electromechanical interaction in marine propulsion
    • Dynamic Study of Electromechanical Interaction in Marine Propulsion, 2016 IEEE Energy Conversion Congress and Exposition, Milwaukee, WI
    • Empirical and biophysical estimations of human cochlea’s psychophysical tuning curve sharpness
    • Generalized metamaterials: Definitions and taxonomy
    • Highly sensitive optical motion detector
    • Identification and quantification of volatile chemical spoilage indexes associated with bacterial growth dynamics in aerobically stored chicken
    • Introduction to Singapore’s 3D printing research and its applications”, KSPE Spring Conference, Jeju
    • Low-cost, disposable microfluidics device for blood plasma extraction using continuously alternating paramagnetic and diamagnetic capture modes
    • Micro-ultrasonic welding using thermoplastic-elastomeric composite film
    • Nonlinear dynamic analyses on a magnetopiezoelastic energy harvester with reversible hysteresis
    • Performance comparison of resource allocation without feedback in wireless body area networks by various pseudo orthogonal sequences
    • Phase-dependent dynamic potential of magnetically coupled two-degree-of-freedom bistable energy harvester
    • Polymeric biomaterials for medical implants and devices
    • Self-powered switch-controlled nucleic acid extraction system
    • Volatile chemical spoilage indexes of raw Atlantic salmon (Salmo salar) stored under aerobic condition in relation to microbiological and sensory shelf lives
    • 3D printed microfluidics for biological applications
    • A circular membrane for nano thin film micro solid oxide fuel cells with enhanced mechanical stability
    • A review on 3D printed bioimplants
    • Biomedical research with MEMS/microfluidic and non-conventional 3D additive manufacturing, Tutorial at 14th International Conference on Electronics, Information, and Communication
    • Computational efficiency of meshfree methods with local-coordinates algorithm
    • Detection of volatile organic compounds as markers of chicken breast spoilage using HS-SPME- GC/MS-FASST
    • Effects of basilar membrane arch and radial tension on the travelling wave in gerbil cochlea
    • Halide‐Ion‐Assisted Synthesis of Different α‐Fe2O3 Hollow Structures and Their Lithium‐Ion Storage Properties
    • Human stapedial annular ligament mechanical and geometrical property analysis using a bi-layer tapered beam model
    • LoMA-B: a simple and versatile lab-on-a-chip system based on single-channel bisulfite conversion for DNA methylation analysis
    • Nonlinear analysis of 2D flexible flapping wings
    • Novel graphene/polyaniline/MnO x 3D-hydrogels obtained by controlled morphology of MnO x in the graphene/polyaniline matrix for high performance binder-free supercapacitor electrodes
    • Polyaniline‐Coated Hollow Fe2O3 Nanoellipsoids as an Anode Material for High‐ Performance Lithium‐Ion Batteries
    • Rapid and label-free amplification and detection assay for genotyping of cancer biomarker
    • Real-time precision pedestrian navigation solution using inertial navigation system and global positioning system
    • Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes–Ecoflex nanocomposites
    • 3D printing as an efficient way for comparative study of biomimetic structures—trabecular bone and honeycomb
    • A continuous flow micro filtration device for plasma/blood separation using submicron vertical pillar gap structures
    • Analysis of oxide (Al 2 O 3, CuO, and ZnO) and CNT nanoparticles disaggregation effect on the thermal conductivity and the viscosity of nanofluids
    • Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures
    • Biomedical research with MEMS/microfluidics and non-conventional 3D additive manufacturing, 4th Asia-Korea Conference on Science and Technology 2014 (AKC 2014)
    • Biotin-streptavidin binding interactions of dielectric filled silicon bulk acoustic resonators for smart label-free biochemical sensor applications
    • Detection of thiocholine ions with cobalt phthalocyanine mediated screen printed electrode
    • Lab-on-a-Chip Microfluidic Device for Bisulfite Modification to Detect DNA Methylation in Micro and Nano Engineering Conference, 2014, the 40th International conference, Lausanne
    • Microfluidics biosensor chip with integrated screen-printed electrodes for amperometric detection of nerve agent
    • Molecular dynamics simulation of oxygen ion diffusion in yttria stabilized zirconia single crystals and bicrystals.Fuel Cells, 14(4)
    • Optimizing present power distribution system and novel renewable energy sources for Tamil Nadu in India using HOMER
    • Performance Comparison of Resource Allocation without Feedbak in Wireless Body Area Networks by Various Pseudo Orthogonal Codes, 4th Asia-Korea Conference on Science and Technology 2014 (AKC 2014)
    • Silicon nanowire-based ring-shaped tri-axial force sensor for smart integration on guidewire
    • Smart Grid System for Home Automation with Integrated Android Application, 4th Asia-Korea Conference on Science and Technology 2014 (AKC 2014)
    • The kinematic/kinetic differences of the knee and ankle joint during single-leg landing between shod and barefoot condition
    • A novel checker-patterned AlN MEMS resonator as gravimetric sensor
    • A study of piezoelectric harvesters for low-level vibrations in wireless sensor networks
    • Characterization of a Bio-inspired Tri-axial Piezoresistive Silicon Nanowire Tactile Sensor in ICMAT 2013, 7th International Conference on Materials for Advanced Technologies
    • Development and Characterization of a Silicon Nanowire Based Ring Shape Force Sensor for Guidewire Application, 3rd Asia-Korea Conference on Science and Technology (AKC3)
    • Dimers of human β-defensins and their interactions with the POPG membrane
    • Enhancement of nanoelectronic sensor performance with microfluidic device
    • Enhancement of Nanoelectronic Sensor Performance with Microfluidic Device, 2013 IEEE 5th International Nanoelectronics Conference (INEC), pp
    • Enhancement of Nanoelectronic Sensor Performance with Microfluidic Device, Lab on a chip 2013
    • Estimation of Singapore’s hourly solar radiation using hybrid-Markov transition matrices method
    • High performance fuzzy-Padé controllers: introduction and comparison to fuzzy controllers
    • Highly sensitive Mach–Zehnder interferometer biosensor based on silicon nitride slot waveguide
    • Label-free, PCR-free chip-based detection of telomerase activity in bladder cancer cells
    • Microfluidic Device with Effective Method to Enhance Sensitivity of Biophotonic Sensor, 3rd Asia-Korea Conference on Science and Technology 2013 (AKC 2013)
    • Nano-patterned dual-layer ITO electrode of high brightness blue light emitting diodes using maskless wet etching
    • Nonlinear behaviors of a multi-stable piezoelectric energy harvester using magnetic repulsion forces, 3rd Asia-Korea Conference on Science and Technology (AKC), Paper No
    • On the freezing and structure of hard spheres under spherical confinement
    • Real time Implementation of MEMS INS/GPS System
    • Reduction of Uplink Feedback Overhead in Electric Vehicle Charging Operation with Smart Grid System, 3rd Asia-Korea Conference on Science and Technology (AKC)
    • Service reliability improvement in manufacturing and operating systems
    • Silicon nanowire based ring shape force sensor for sensorized guidewires
    • Silicon Nanowire Based Ring Shape Force Sensor for Sensorized Guidewires in Transducers’13, 2013, The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, Barcelona
    • Silicon-based optoelectronic integrated circuit for label-free bio/chemical sensor
    • THE EFFECT OF SHOES ON KNEE KINETICS AND ANTERIOR TIBIAL TRANSLATION DURING SINGLE-LEG LANDING
    • A Ring-Shaped Tri-Axial Force Sensor for Minimally Invasive Surgery in ICMBE 2012, International Conference on Medical and Biological Engineering, September 12-13, 2012
    • A sensorized surgical needle with miniaturized MEMS tri-axial force sensor for robotic assisted minimally invasive surgery
    • A Study of Piezoelectric Harvester for Low Level Vibrations in Wireless Sensor Networks, International Conference on Innovation Design and Manufacturing, Taipei
    • Bioinspired 3-d piezoresistive micro-tactile sensor array in APCOT 2012, The 6th Asia-Pacific Conference on Transducers and Micro/Nano Technologies
    • Development of a ring-shaped tri-axial tactile sensor for minimally invasive surgery applications in Bio4Apps 2012
    • Enhancement of Nanoelectronic Sensor Performance with Microfluidic Device, International Conference on BioElectronics, BioSensors, BioMedical Devices, BioMEMS/NEMS and Applications 2012 (Bio4Apps 2012)
    • Estimation of optimal insertion angle in a mammalian outer hair cell stereocilium
    • Estimation of the free energy of hard-sphere crystals via a free-volume approach
    • Exploiting Higher Kinematic Performance-Using a 4-Legged Redundant PM Rather than Gough-Stewart Platforms
    • High sensitive dielectric filled Lamé mode mass sensor
    • Intracochlear fluid pressure and cochlear input impedance from push-pull amplification model
    • Simulation based design of disk resonator biosensors under fabrication uncertainty
    • Simulation of train induced forced wind draft for generating electrical power from Vertical Axis Wind Turbine (VAWT)
    • Analysis and design of a high performance and low cost bio-mass sensor based on the radial contour mode disk resonator
    • Comparison of Basilar Membrane Vibration from a Cochlear Model and Auditory Neural Thresholds
    • Developing high sensitivity biomass sensor using lamé mode square resonator
    • Developing High Sensitivity Biomass Sensor Using Lamé Mode Square Resonator, ICMAT'11
    • Exact formulations of non-linear planar and spatial Euler–Bernoulli beams with finite strains
    • Feed-forward and feed-backward amplification model from cochlear cytoarchitecture: an interspecies comparison
    • Piezoelectric MEMS resonant gas sensor for defence applications
    • Piezoelectric MEMS resonant gas sensor for defence applications, Defense Science Research Conference and Expo, 1-3
    • Ultrasensitive dielectric filled lamé mode biomass sensor
    • Ultrasensitive Dielectric Filled Lamé Mode Biomass Sensor in Transducers' 11, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, pp
    • Ultrasensitive High Sensitivity Dielectric Filled Lamé Mode Resonator for Chemical and Biological Applications, Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, pp
    • A Three-Dimensional Model Of Human Stereocilia Nano Deflections Under Basilar Membrane Vibration
    • Design of High Mass Sensitivity Bio-mass Sensor Using the Radial-contour- mode Disk Resonator, Micro-and Nano-Engineering (MNE), Genoa
    • Ultrasensitive real time biomass sensor using Lamé mode square resonator, Micro-and Nano-Engineering (MNE), Genoa
    • A cochlear model using the time-averaged Lagrangian and the push-pull mechanism in the organ of Corti
    • COCHLEAR MODELING USING" TIME-AVERAGED LAGRANGIAN" METHOD: COMPARISON WITH V BM, P ST, AND ZC MEASUREMENTS
    • Physiologically based three dimensional cochlear models: An interspecies comparison
    • Stereoselective Synthesis of Diverse α-Hydroxy-β-amino Acids and It's Application for Synthesis of Dipeptide Expecting as a Protease Inhibitor
    • Cochlear anatomy using micro computed tomography (micro CT) imaging
    • Cochlear anatomy using micro computed tomography (micro CT) imaging, SPIE, San Jose
    • Effect of hook region geometry represented in a cochlear model, 10th Mechanics of Hearing Workshop, Keele University
    • Intracochlear Pressure from a Three-Dimensional Model, Pan American Congress of Applied Mechanics X, Cancun
    • Kim, N., Yoon, Y. -J., Puria, S., and Steele, C
    • Basilar Membrane Velocity and Organ of Corti Impedance from the Physiologically-Based Three- Dimensional Cochlear Model
    • Frequency and spatial response of basilar membrane vibration in a three-dimensional gerbil cochlear model
    • Intracochlear pressure and derived quantities from a three-dimensional model
    • Asymptotic-numerical solution for cochlear model with full organ of Corti
    • Intracochlear pressure and organ of corti impedance from a linear active three-dimensional model
    • Conferences
    • Journals
    • Lectures
    • Patents
  • Contact
  • Facilities
  • Join Us
  • Members
    • Alumni
    • Professor
  • Projects
  • Research

Energy conversation device and method of forming the same

Jan 30, 2020·
Yoon Yong-Jin
Yoon Yong-Jin
· 1 min read
Type
Patent
Publication
Singapore, Patent Application 10201911005S (licensed)
publications

Energy conversation device and method of forming the same(licensed), Singapore, Patent Application 10201911005S, 2020.01.30

Last updated on Jan 30, 2020
Yoon Yong-Jin
Authors
Yoon Yong-Jin
Professor, Ph.D.
← Fuel Cell Jul 7, 2020
Design Thinking and Digital Transformation Jan 1, 2020 →

© 2026 Just Do it Lab in ME, KAIST. This work is licensed under CC BY NC ND 4.0

Made with Hugo Blox Builder. Build your site →