• Home
  • News
  • Team
    • Professor
    • Current Members
    • Alumni
  • Research
    • Research Areas
    • Projects
    • Facilities
  • Publications
    • Journals
    • Conferences
    • Patents
    • Lectures
  • Join Us
  • Contact
ESC

Searching...

No results found

↑↓ Navigate ↵ Select
Powered by Hugo Blox
  • News
    • “韓 방산 드론 일괄 개발 탈피, 진화적 개발 체계 도입해야”
    • "값싼 드론이 전쟁 판도 바꿔... 韓,' 소버린 방산 드론' 전략 필요"
    • 이란전 게임체인저 드론, 항공기 아닌 탄약처럼 쓰인다
    • "본질은 이스라엘 변수" 트럼프 '지상군' 발언에 중동 확전 우려
    • "중국은 소총, 우린 활"...8년 뒤처진 K-드론 | SBS 뉴스
    • 로봇 '두뇌'는 미국, '몸'은 중국.. 한국의 반격 실마리는? | SBS 뉴스토리
    • 중국미래전략산업세미나, 드론 산업의 미래: 중국의 속도, 한국의 전략
    • 윤용진 카이스트 교수팀, 자가 치유 3D 프린팅 기술 국제 학술지 게재
    • 카이스트-구니스, 3D 프린팅 활용 '브릭코스터' 개발
    • 아름덴티스트리-카이스트, 3D 프린팅 연구 협력
    • 2023 GGGF 초격차 방위산업을 위한 AI 첨단 드론
    • 색깔로 이갈이 진단 스플린트 개발 화제
    • KAIST, 대전 방산 특화 개발연구소 구축…첨단 드론 연구 본격화
    • 카이스트, 방산 특화 첨단 드론 개발연구소 선정
    • 학생 창업기업 유니테크쓰리디피, 2022 X-IST 창업경진대회 대상(장관상) 수상
    • 주식회사 도우리-KAIST JDL, '디지털 음향 힐링센터' 개소
    • 윤용진 한국과학기술원 교수, 대학산업기술지원단 12대 단장 취임
    • "탄소제로가 곧 생존이 되는 시대" 이민환·윤용진·이원영의 『수소경제』
    • 수소경제, 2050 탄소배출제로, 수소가 답이다.
    • KAIST, 미세 유체 회전 운동 활용한 '현장 진단용 초고감도 바이오센서' 개발
    • 카이스트, 대학산업기술지원단과 인간중심 디자인씽킹 글로벌 창업교육에 앞장서
    • KAIST, 구글과 공동으로 AI 교육과정 개발한다
    • '디지털 네이티브를 위한 스마트러닝' 심포지엄 열어
    • 세종시-국토부, 자율주행 모빌리티 국제컨퍼런스 개최
    • 포스텍 등 대학 6곳 '반도체 지원사업' 선정
    • '실리콘'밸리?, 이제는 '싱가포르'밸리!
    • 에스피케어, '셀리온 DC온열매트' 기반 카이스트와 공동연구 협약 체결
    • 인천 항공융복합 신산업 육성 전략 세미나 개최
    • 자율주행차 달리는 '세종·제주의 미래' 미리 본다
    • 경기도公, 판교서 '경기 스마트시티 국제세미나'
    • 2017 판교자율주행모터쇼 산업전시포럼
    • 글로벌 기업가정신워크숍·창업경진대회
    • 충북대 LINC+사업단·창업지원단 '창업 특강'
    • KAIST, 대전 방산 특화 개발연구소 구축…첨단 드론 연구 본격화
  • Publications
    • Cellulose nanocrystals: Advancements and applications in 3D printing
    • Early deployment of deep learning models for lithium-ion battery state-of-health prediction with limited initial data
    • Enhancing mechanical performance of elastomeric vat-photopolymerized resins via functionalized cellulose nanocrystals
    • LLM-Inspired Vision Transformer Framework for Intelligent Quality Recognition in Aerosol Jet Printing
    • Near-critical bistable shock isolator designed with symmetry-breaking extension springs
    • Acoustofluidics Lab on a Chip System for size-based Nanoparticle Separation
    • Asymmetric bistable shock isolators for repeated force-transfer nullification using optimal payload return
    • Balancing Initial Stability and Stress Shielding in Screw Fixation of 3D-Implants for Osteosarcoma by Comparing Compressive and Locking Screws
    • Data-Augmented Online Updating of a Transformer–LSTM for Battery State Prediction
    • Effects of Factors on the Glass Transition Temperature in 4D Printing Using Design of Experiments
    • Exploring the Effect of Cadaver Head Fixation in Bone Conduction Hearing: Insights from Finite Element Modeling
    • Exploring the impact of force direction and phase on bone conduction hearing with bone conduction actuator
    • Hydration Reaction-Powered DNA Analysis Kit for Non-Instrumented Point-of-Care Diagnostics
    • Layer-wise Finite Element Modeling Approach in Fused Filament Fabrication for Vibration Control
    • Microstructure-Properties Relationships in Elastomeric Vat-Photopolymerized Resins Reinforced with Functionalized Cellulose Nanocrystals
    • Nonlinear shock isolation using the bottleneck phenomenon near a saddle–node ghost
    • Solid-State On-Chip Thermal Management Using Micro-Thermoelectric Devices
    • Sputtered SDC/Pt layered composite cathode with improved thermal stability for solid oxide fuel cells below 500° C
    • The HSV-Morphology Preprocessing Technique for Enhancing the Performance of Agricultural Object Detection Models
    • Torsional stiffness-softening effect of torque-dependent variation in moment arm length for torsional vibration isolation
    • Analytical investigation of bifurcations in bistable shock isolators
    • Anhysteretic high-static–low-dynamic stiffness vibration isolators with tunable inertial nonlinearity
    • Bistable shock isolator tuned to zero-frequency singularity for platform protection
    • Bistable Shock Isolators under Half-Sine Shock
    • Characterizing the Performance of a Resonance-Based MEMS Particle Sensor with Glass Beads
    • Competitive advantages of a bistable vibration isolator: Cut-off frequency and operational safety near harmful resonance
    • Conductive rGO/PEGDA Hydrogel for Controllable Drug Release
    • Digital light processing 3D printing of porous ceramics: A systematic analysis from a debinding perspective
    • Experimental Study on the Improving Properties of Cellulose Nano Crystal Reinforced Resin Based on Photopolymerization 3D Printing Method
    • Low-Intensity Continuous Ultrasound Enhances the Therapeutic Efficacy of Curcumin-Encapsulated Exosomes Derived from Hypoxic Liver Cancer Cells via Homotropic Drug Delivery Systems, Bioengineering
    • Prediction of curing depth dependence on CNT nanofiller dispersion for vat photopolymerization 3D printing
    • Processing Challenges and Delamination Prevention Methods in Titanium-Steel DED 3D printing
    • Real-time in-process control methods of process parameters for additive manufacturing
    • Real-time Predicting the Low-Temperature Performance of WLTC-based Lithium-Ion Battery Using an LSTM-PF Sequential Ensemble Model
    • Self‐Healing Materials for 3D Printing
    • Theoretical analysis of nonlinear critical phenomena in bistable shock isolators
    • A digital light processing 3D printing approach for tuning the interfacial properties of pore forming agents for porous ceramics
    • Digital light processing (DLP) based fabrication of porous ceramics by optimizing materials and process parameters
    • Effectiveness of Mental Health care by Using Machine Learning on Manufacturing Worker
    • Enhancing the reliability of particulate matter sensing by multivariate Tobit model using weather and air quality data
    • Fabrication of Porous Ceramic Parts via a Digital Light Processing-based 3D Printing Method
    • Near-Eye Holographic 3D Display and Advanced Amplitude-Modulating Encoding Scheme for Extended Reality
    • Nonlinear Dynamic Analysis of a Piezoelectric Energy Harvester with Mechanical Plucking Mechanism
    • Plasmonic metasurfaces of cellulose nanocrystal matrices with quadrants of aligned gold nanorods for photothermal anti-icing
    • Super aligned annular ring patterns of self-assembled nanomaterials
    • Applications, treatment, and reuse of plastic in electrical and electronic equipment
    • Avalanche Coalescence of Liquid Metal Particles for Uniform Flexible and Stretchable Electrodes
    • Average-Accumulated Normalized Dose (A-AND) Predicts Mechanical Properties of Photopolymer Printed by Vat Photopolymerization"
    • Continuously Varied Infill Pattern (ConVIP) for Fused Filament Fabrication 3D Printing
    • Continuously Varied Infill Pattern (ConVIP): Improvement of mechanical properties and printing speed of Fused Filament Fabrication (FFF) 3D printing"
    • Effect of angstrom-level oxide overcoat on Sr segregation behavior of LSM electrodes, International Journal of Hydrogen Energy, 47 (77)
    • Enhancing reliability of particulate matter sensing by machine learning using weather and air-quality data
    • Evaluation of Dispersion State of CNTs in Resin, and its Curing Characteristics Depending on the Dispersion State
    • Evaluation of eye response using a wearable display with automatic interpupillary distance adjustment, Optics Express, 30 (5)
    • Harmonic Balance Analysis of Magnetically Coupled Two-degree-of-freedom Bistable Energy Harvesters"
    • Hybrid material extrusion 3D printing to strengthen interlayer adhesion through hot rolling
    • In situ electrical and electrochemical characteristic measurement using AFM in high temperature
    • Influence of dispersant concentration toward enhancing printing precision and surface quality of vat photopolymerization 3D printed ceramics
    • Machine Learning-Assisted Optimization of TBBPA-bis-(2,3-dibromopropyl ether) Extraction Process from ABS Polymer, Chemosphere, 287
    • Optimal dispersant concentration of PZT ceramic-containing slurry to enhance printing and surface quality of DLP 3D printed ceramics
    • Structural and Electrical Properties of Atomic Layer Deposited PtRu Bimetallic Alloy Thin Films, Coatings, 12 (1)
    • Ultrasonic-assisted tetrabromobisphenol A-bis-(2, 3-dibromo-2-methylpropyl ether) extraction process from ABS polymer supported by machine learning
    • Ultrasonic-assisted tetrabromobisphenol A-Derived Brominated Flame Retardant Extraction Process from ABS Polymer Supported by Machine Learning
    • Continuously Varied Infill Pattern method for 3D printing
    • Method of PM2.5 sensor calibration by using visibility, weather and climate data
    • 4D printing materials for Vat Photopolymerization
    • A rotationally focused flow (RFF) microfluidic biosensor by density difference for early-stage detectable diagnosis
    • A study on the improvement of the adhesion rate of photocurable 3D ceramic resin
    • Ceramic 3D printing manufacturing technology
    • Development of a 3D Printing Teeth Splint including a Colorimetric Sensor, Korean Society of Precision Engineering Proceedings
    • Enhancing Interlayer Adhesion of Fused Deposition Modeling through Thermo- mechanical Methods
    • Fabrication of Plasmon-Active Polymer-Nanoparticle Composites for Biosensing Applications
    • FDM 3D Printed Shape Deformation Characteristics Analysis
    • Glass transition temperature prediction based on tBA-co-DEGDA composition and 4D printing process full-factorial DOE and machine learning
    • How the saline water intrusion has reshaped the agricultural landscape of the Vietnamese Mekong Delta, a review
    • Improvement of Mechanical Properties based on Continuously Varied Infill Pattern (ConVIP) Method in FDM Type 3D printing, International Symposium on Precision Engineering and Sustainable Manufacturing
    • Inkjet-printed Ag@ SDC core-shell nanoparticles as a high-performance cathode for low-temperature solid oxide fuel cells
    • Load Resistance Optimization of a Magnetically Coupled Two-Degree-of-Freedom Bistable Energy Harvester Considering Third-Harmonic Distortion in Forced Oscillation
    • On the road to hydrogen society: Enabling technologies toward Carbon Net-Zer
    • Optical and electrical properties of multilayer grid electrodes for highly durable transparent conductive electrodes
    • Optimization of 3D Printing Process Parameters for Mechanical Properties of DLP-Printed Photopolymer
    • Predicting 4D printing Factors based on Design of Experiment (DoE) and Machine Learning with Small Data
    • Printing of Woodpile Scaffold Using Fresnel Lens for Tissue Engineering
    • Studies on the dimensional and piezoelectric characteristics of 3D printed piezoelectric structures
    • The Study on the Composition of Materials for High-resolution 3D Ceramic Printing Technology
    • TiO2 Nanorods and Pt Nanoparticles under a UV-LED for an NO2 Gas Sensor at Room Temperature
    • Toward sustainable 3D printing technology: Ultra fast and low cost 3D hologram printing
    • Biosensor using multiphase flow and its operation method
    • Enhancement of label-free optical biosensor in rotationally focused flow-based microfluidic system
    • Fuel Cell
    • Energy conversation device and method of forming the same
    • Design Thinking and Digital Transformation
    • Estimation of Inertial Measurement Unit based 3D Localization
    • Impact of Fine Particulate Matter on Visibility at Incheon International Airport, South Korea
    • Inertial Measurement unit based ZUPT & Kalman filter algorithm for 3D position estimation
    • Prediction of 4D Printing shape memory polymer characterization using machine learning
    • Three-Dimensional Printing of Piezoelectric Materials for Direction Sensor
    • Three-Dimensional Printing of Piezoelectric Structure for strain sensor
    • Understanding Interdependencies between Mechanical Velocity and Electrical Voltage in Electromagnetic Micromixers
    • Enhanced broadband performance of magnetically coupled 2-DOF bistable energy harvester with secondary intrawell resonances
    • Frequency Response Analysis of a 2-DOF Bistable Energy Harvesting System, KSPE 2020, 21(8)
    • Specific heat measurements of CNT nanofluids
    • Energy conversation device and method of forming the same
    • 能量转换装置及形成其的方法
    • Energy conversion device and its manufacturing method
    • A disposable lab-on-a-chip platform for highly efficient RNA isolation
    • A novel control technique to reduce the effects of torsional interaction in wind turbine system
    • An acoustic micromixer using low-powered voice coil actuation
    • Direct Drive Propeller System Modelling and Active Protection
    • Effect of electrolyte thickness on electrochemical reactions and thermo- fluidic characteristics inside a SOFC unit cell
    • Energy conversion device and method of forming the same
    • Liu, X., Ganjanayake, C
    • Mechanical effects of cochlear implant on acoustic hearing
    • Mechanism of bone-conducted hearing: mathematical approach
    • Mitigation of resonance vibration effects in marine propulsion
    • Modelling and Control to Mitigate Dynamic Effects of Unbalanced Masses in Wind Turbine Systems
    • Numerical study on electrochemical performance of low-temperature micro- solid oxide fuel cells with submicron platinum electrodes
    • Study of concentric, eccentric and split type magnetic membrane micro-mixers
    • Study on PM10, PM2.5, and visibility impairment. 한국 기상학회 학술대회 논문집
    • Two-Wavelength, Photo-Initiation and Photo-Inhibition Competing for Selective Photo-Patterning of Hydrogel Porous Microstructures
    • UV-LEDs for the disinfection and bio-sensing applications
    • Won, W.-S., Oh, R., Lee, W., Kim, Yoon, Y.-J., 2018 Study on PM10, PM2.5, and visibility impairment, Proceedings of the Korean Meteorological Society
    • 3D printed polycaprolactone carbon nanotube composite scaffolds for cardiac tissue engineering
    • An optical MEMS accelerometer fabricated using double-sided deep reactive ion etching on silicon-on- insulator wafer
    • Dynamic analysis of diesel generator set under cylinder deactivation
    • Femtosecond-laser-based 3D printing for tissue engineering and cell biology applications
    • Mechanical model of an arched basilar membrane in the gerbil cochlea
    • Modeling and control of marine diesel generator system with active protection
    • Piezoelectric cylindrical design for harvesting energy in multi-directional vibration source
    • Reduction of control signal overhead for electric vehicle charging operation in smart grid system
    • Sensor placement analysis for torsional vibration suppression on marine electric propulsion
    • Sputtered nanoporous PtNi thin film cathodes with improved thermal stability for low temperature solid oxide fuel cells
    • Threshold-Based Random Charging Scheme for Decentralized PEV Charging Operation in a Smart Grid
    • Energy conversation device and method of forming the same
    • Dynamic study of electromechanical interaction in marine propulsion
    • Dynamic Study of Electromechanical Interaction in Marine Propulsion, 2016 IEEE Energy Conversion Congress and Exposition, Milwaukee, WI
    • Empirical and biophysical estimations of human cochlea’s psychophysical tuning curve sharpness
    • Generalized metamaterials: Definitions and taxonomy
    • Highly sensitive optical motion detector
    • Identification and quantification of volatile chemical spoilage indexes associated with bacterial growth dynamics in aerobically stored chicken
    • Introduction to Singapore’s 3D printing research and its applications”, KSPE Spring Conference, Jeju
    • Low-cost, disposable microfluidics device for blood plasma extraction using continuously alternating paramagnetic and diamagnetic capture modes
    • Micro-ultrasonic welding using thermoplastic-elastomeric composite film
    • Nonlinear dynamic analyses on a magnetopiezoelastic energy harvester with reversible hysteresis
    • Performance comparison of resource allocation without feedback in wireless body area networks by various pseudo orthogonal sequences
    • Phase-dependent dynamic potential of magnetically coupled two-degree-of-freedom bistable energy harvester
    • Polymeric biomaterials for medical implants and devices
    • Self-powered switch-controlled nucleic acid extraction system
    • Volatile chemical spoilage indexes of raw Atlantic salmon (Salmo salar) stored under aerobic condition in relation to microbiological and sensory shelf lives
    • 3D printed microfluidics for biological applications
    • A circular membrane for nano thin film micro solid oxide fuel cells with enhanced mechanical stability
    • A review on 3D printed bioimplants
    • Biomedical research with MEMS/microfluidic and non-conventional 3D additive manufacturing, Tutorial at 14th International Conference on Electronics, Information, and Communication
    • Computational efficiency of meshfree methods with local-coordinates algorithm
    • Detection of volatile organic compounds as markers of chicken breast spoilage using HS-SPME- GC/MS-FASST
    • Effects of basilar membrane arch and radial tension on the travelling wave in gerbil cochlea
    • Halide‐Ion‐Assisted Synthesis of Different α‐Fe2O3 Hollow Structures and Their Lithium‐Ion Storage Properties
    • Human stapedial annular ligament mechanical and geometrical property analysis using a bi-layer tapered beam model
    • LoMA-B: a simple and versatile lab-on-a-chip system based on single-channel bisulfite conversion for DNA methylation analysis
    • Nonlinear analysis of 2D flexible flapping wings
    • Novel graphene/polyaniline/MnO x 3D-hydrogels obtained by controlled morphology of MnO x in the graphene/polyaniline matrix for high performance binder-free supercapacitor electrodes
    • Polyaniline‐Coated Hollow Fe2O3 Nanoellipsoids as an Anode Material for High‐ Performance Lithium‐Ion Batteries
    • Rapid and label-free amplification and detection assay for genotyping of cancer biomarker
    • Real-time precision pedestrian navigation solution using inertial navigation system and global positioning system
    • Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes–Ecoflex nanocomposites
    • 3D printing as an efficient way for comparative study of biomimetic structures—trabecular bone and honeycomb
    • A continuous flow micro filtration device for plasma/blood separation using submicron vertical pillar gap structures
    • Analysis of oxide (Al 2 O 3, CuO, and ZnO) and CNT nanoparticles disaggregation effect on the thermal conductivity and the viscosity of nanofluids
    • Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures
    • Biomedical research with MEMS/microfluidics and non-conventional 3D additive manufacturing, 4th Asia-Korea Conference on Science and Technology 2014 (AKC 2014)
    • Biotin-streptavidin binding interactions of dielectric filled silicon bulk acoustic resonators for smart label-free biochemical sensor applications
    • Detection of thiocholine ions with cobalt phthalocyanine mediated screen printed electrode
    • Lab-on-a-Chip Microfluidic Device for Bisulfite Modification to Detect DNA Methylation in Micro and Nano Engineering Conference, 2014, the 40th International conference, Lausanne
    • Microfluidics biosensor chip with integrated screen-printed electrodes for amperometric detection of nerve agent
    • Molecular dynamics simulation of oxygen ion diffusion in yttria stabilized zirconia single crystals and bicrystals.Fuel Cells, 14(4)
    • Optimizing present power distribution system and novel renewable energy sources for Tamil Nadu in India using HOMER
    • Performance Comparison of Resource Allocation without Feedbak in Wireless Body Area Networks by Various Pseudo Orthogonal Codes, 4th Asia-Korea Conference on Science and Technology 2014 (AKC 2014)
    • Silicon nanowire-based ring-shaped tri-axial force sensor for smart integration on guidewire
    • Smart Grid System for Home Automation with Integrated Android Application, 4th Asia-Korea Conference on Science and Technology 2014 (AKC 2014)
    • The kinematic/kinetic differences of the knee and ankle joint during single-leg landing between shod and barefoot condition
    • A novel checker-patterned AlN MEMS resonator as gravimetric sensor
    • A study of piezoelectric harvesters for low-level vibrations in wireless sensor networks
    • Characterization of a Bio-inspired Tri-axial Piezoresistive Silicon Nanowire Tactile Sensor in ICMAT 2013, 7th International Conference on Materials for Advanced Technologies
    • Development and Characterization of a Silicon Nanowire Based Ring Shape Force Sensor for Guidewire Application, 3rd Asia-Korea Conference on Science and Technology (AKC3)
    • Dimers of human β-defensins and their interactions with the POPG membrane
    • Enhancement of nanoelectronic sensor performance with microfluidic device
    • Enhancement of Nanoelectronic Sensor Performance with Microfluidic Device, 2013 IEEE 5th International Nanoelectronics Conference (INEC), pp
    • Enhancement of Nanoelectronic Sensor Performance with Microfluidic Device, Lab on a chip 2013
    • Estimation of Singapore’s hourly solar radiation using hybrid-Markov transition matrices method
    • High performance fuzzy-Padé controllers: introduction and comparison to fuzzy controllers
    • Highly sensitive Mach–Zehnder interferometer biosensor based on silicon nitride slot waveguide
    • Label-free, PCR-free chip-based detection of telomerase activity in bladder cancer cells
    • Microfluidic Device with Effective Method to Enhance Sensitivity of Biophotonic Sensor, 3rd Asia-Korea Conference on Science and Technology 2013 (AKC 2013)
    • Nano-patterned dual-layer ITO electrode of high brightness blue light emitting diodes using maskless wet etching
    • Nonlinear behaviors of a multi-stable piezoelectric energy harvester using magnetic repulsion forces, 3rd Asia-Korea Conference on Science and Technology (AKC), Paper No
    • On the freezing and structure of hard spheres under spherical confinement
    • Real time Implementation of MEMS INS/GPS System
    • Reduction of Uplink Feedback Overhead in Electric Vehicle Charging Operation with Smart Grid System, 3rd Asia-Korea Conference on Science and Technology (AKC)
    • Service reliability improvement in manufacturing and operating systems
    • Silicon nanowire based ring shape force sensor for sensorized guidewires
    • Silicon Nanowire Based Ring Shape Force Sensor for Sensorized Guidewires in Transducers’13, 2013, The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, Barcelona
    • Silicon-based optoelectronic integrated circuit for label-free bio/chemical sensor
    • THE EFFECT OF SHOES ON KNEE KINETICS AND ANTERIOR TIBIAL TRANSLATION DURING SINGLE-LEG LANDING
    • A Ring-Shaped Tri-Axial Force Sensor for Minimally Invasive Surgery in ICMBE 2012, International Conference on Medical and Biological Engineering, September 12-13, 2012
    • A sensorized surgical needle with miniaturized MEMS tri-axial force sensor for robotic assisted minimally invasive surgery
    • A Study of Piezoelectric Harvester for Low Level Vibrations in Wireless Sensor Networks, International Conference on Innovation Design and Manufacturing, Taipei
    • Bioinspired 3-d piezoresistive micro-tactile sensor array in APCOT 2012, The 6th Asia-Pacific Conference on Transducers and Micro/Nano Technologies
    • Development of a ring-shaped tri-axial tactile sensor for minimally invasive surgery applications in Bio4Apps 2012
    • Enhancement of Nanoelectronic Sensor Performance with Microfluidic Device, International Conference on BioElectronics, BioSensors, BioMedical Devices, BioMEMS/NEMS and Applications 2012 (Bio4Apps 2012)
    • Estimation of optimal insertion angle in a mammalian outer hair cell stereocilium
    • Estimation of the free energy of hard-sphere crystals via a free-volume approach
    • Exploiting Higher Kinematic Performance-Using a 4-Legged Redundant PM Rather than Gough-Stewart Platforms
    • High sensitive dielectric filled Lamé mode mass sensor
    • Intracochlear fluid pressure and cochlear input impedance from push-pull amplification model
    • Simulation based design of disk resonator biosensors under fabrication uncertainty
    • Simulation of train induced forced wind draft for generating electrical power from Vertical Axis Wind Turbine (VAWT)
    • Analysis and design of a high performance and low cost bio-mass sensor based on the radial contour mode disk resonator
    • Comparison of Basilar Membrane Vibration from a Cochlear Model and Auditory Neural Thresholds
    • Developing high sensitivity biomass sensor using lamé mode square resonator
    • Developing High Sensitivity Biomass Sensor Using Lamé Mode Square Resonator, ICMAT'11
    • Exact formulations of non-linear planar and spatial Euler–Bernoulli beams with finite strains
    • Feed-forward and feed-backward amplification model from cochlear cytoarchitecture: an interspecies comparison
    • Piezoelectric MEMS resonant gas sensor for defence applications
    • Piezoelectric MEMS resonant gas sensor for defence applications, Defense Science Research Conference and Expo, 1-3
    • Ultrasensitive dielectric filled lamé mode biomass sensor
    • Ultrasensitive Dielectric Filled Lamé Mode Biomass Sensor in Transducers' 11, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, pp
    • Ultrasensitive High Sensitivity Dielectric Filled Lamé Mode Resonator for Chemical and Biological Applications, Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, pp
    • A Three-Dimensional Model Of Human Stereocilia Nano Deflections Under Basilar Membrane Vibration
    • Design of High Mass Sensitivity Bio-mass Sensor Using the Radial-contour- mode Disk Resonator, Micro-and Nano-Engineering (MNE), Genoa
    • Ultrasensitive real time biomass sensor using Lamé mode square resonator, Micro-and Nano-Engineering (MNE), Genoa
    • A cochlear model using the time-averaged Lagrangian and the push-pull mechanism in the organ of Corti
    • COCHLEAR MODELING USING" TIME-AVERAGED LAGRANGIAN" METHOD: COMPARISON WITH V BM, P ST, AND ZC MEASUREMENTS
    • Physiologically based three dimensional cochlear models: An interspecies comparison
    • Stereoselective Synthesis of Diverse α-Hydroxy-β-amino Acids and It's Application for Synthesis of Dipeptide Expecting as a Protease Inhibitor
    • Cochlear anatomy using micro computed tomography (micro CT) imaging
    • Cochlear anatomy using micro computed tomography (micro CT) imaging, SPIE, San Jose
    • Effect of hook region geometry represented in a cochlear model, 10th Mechanics of Hearing Workshop, Keele University
    • Intracochlear Pressure from a Three-Dimensional Model, Pan American Congress of Applied Mechanics X, Cancun
    • Kim, N., Yoon, Y. -J., Puria, S., and Steele, C
    • Basilar Membrane Velocity and Organ of Corti Impedance from the Physiologically-Based Three- Dimensional Cochlear Model
    • Frequency and spatial response of basilar membrane vibration in a three-dimensional gerbil cochlear model
    • Intracochlear pressure and derived quantities from a three-dimensional model
    • Asymptotic-numerical solution for cochlear model with full organ of Corti
    • Intracochlear pressure and organ of corti impedance from a linear active three-dimensional model
    • Conferences
    • Journals
    • Lectures
    • Patents
  • Contact
  • Facilities
  • Join Us
  • Members
    • Alumni
    • Professor
  • Projects
  • Research

Energy conversation device and method of forming the same

Jun 7, 2018·
Yoon Yong-Jin
Yoon Yong-Jin
· 1 min read
Type
Patent
Publication
USA, Patent Application US 2018/0159162 A1 (licensed)
publications

Energy conversation device and method of forming the same(licensed), USA, Patent Application US 2018/0159162 A1, 2018.06.07

Last updated on Jun 7, 2018
Yoon Yong-Jin
Authors
Yoon Yong-Jin
Professor, Ph.D.
← Specific heat measurements of CNT nanofluids Jan 1, 2019
能量转换装置及形成其的方法 Mar 23, 2018 →

© 2026 Just Do it Lab in ME, KAIST. This work is licensed under CC BY NC ND 4.0

Made with Hugo Blox Builder. Build your site →